PRE WIRED DC ISOLATORS

Pre-Wired Solar PV DC Isolators with Integrated Surge Protection

BS 7671:2018+A4:2026, published in April 2026, introduces the latest changes to the IET Wiring Regulations. For solar installers, it reinforces the importance of correctly selecting electrical protection on the DC side of PV systems.

This doesn’t mean simply fitting the highest level of surge protection to every installation. The right protection should be selected based on the characteristics and requirements of the individual system.

Understand the changes

What amendment 4 means for solar PV and why it matters.

Type 2 or Type 1+2

Different installations can require different
levels of surge protection.

Not more protection.
The right protection.

A practical guide to selecting the correct
DC protection for your installation.

PRE-WIRED

Ready for Installation.

FASTER INSTALLATION

Less wiring required on site.

FACTORY ASSEMBLED

Consistent controlled construction.

Every additional component that needs assembling and wiring on site adds time and another opportunity for error.

Eco-ESS Pre-Wired DC Isolators remove unnecessary complexity by arriving pre-assembled and ready for integration into the system. That means less preparation, fewer on site connections and a faster route to a clean, professional installation.

SAVE TIME ON SITE


Reduce time spent assembling and wiring individual components.

REDUCE INSTALLATION ERRORS

Standardised factory wiring provides greater consistency between installations.

One Solution. Multiple Configurations.

Whether you’re working on a straightforward domestic installation or a more complex renewable energy system, Eco-ESS offers a versatile range of isolator configurations to meet different installation requirements, with both 600V and 1000V options available.

SINGLE ISOLATOR

DUAL DC ISOLATOR

3 INDEPENDENT ISOLATORS

From Box to Installation, Faster.

01. ARRIVES PRE-WIRED

The isolator is assembled and wired before it reaches site.

02. MOUNT & CONNECT

Position the unit and integrate it into the installation.

03. MOVE ONTO THE NEXT JOB

Less time spent assembling and wiring components on site means a more efficient installation.

Designed for the Way Installers Actually Work.

Eco-ESS products are developed with installers in mind. Our Pre-Wired DC Isolators help remove unnecessary work from the installation process, giving installers a repeatable, professional solution across solar PV and battery storage projects.

Suitable for applications across residential, commercial, and larger energy installations, the range provides flexibility without adding unnecessary complexity.

Reviewed by Eco Energy Storage Systems Ltd technical team. Last reviewed: September 2026

UK BASED SUPPORT

Speak to a team that understands renewable energy installations.

INSTALLER FOCUSED PRODUCTS

Products selected and developed to make installation simpler.

TECHNICAL SUPPORT

Support when you need help specifying or installing your system.

COMPLETE SYSTEM SOLUTIONS

From isolators and gateways to inverters and external enclosures.

View the Range Contact the Team
1. What is a pre-wired DC isolator and why is it important?

A pre-wired DC isolator provides a means of safely disconnecting the DC electrical supply from solar PV panels to an inverter for maintenance, inspection or servicing.
Unlike traditional isolators that require individual components to be assembled and wired on-site, Eco-ESS Pre-Wired DC Isolators arrive factory-assembled, with integrated surge protection and MC4 connectors.
This reduces installation time, minimises on-site wiring and helps installers achieve a consistent, professional installation.

2. What is the difference between a 600V and 1000V DC isolator?

The key difference is the maximum DC voltage each product configuration is designed to accommodate.
A 600V DC isolator assembly is intended for installations where the maximum calculated DC voltage remains within its specified rating. A 1000V configuration is designed for installations operating at higher DC voltages.
600V: Typically suitable for smaller or lower-voltage solar PV string arrangements, commonly found in residential installations.
1000V: May be required for longer solar PV strings or higher-voltage systems, including some larger residential and commercial installations.
The correct choice depends on the maximum possible string voltage, including increases caused by low temperatures, rather than simply the number of panels or size of the property.

3. When would an installer need a 600V DC isolator instead of a 1000V version?

A 600V DC isolator assembly may be suitable for a domestic solar PV installation where the calculated maximum string open-circuit voltage does not exceed 600V and all other product ratings are appropriate.
For example, a string of 10 solar panels, each with an open-circuit voltage of 40V, would have a nominal open-circuit voltage of 400V. Applying a 1.2 temperature correction factor gives a design voltage of 480V.
In this example, a correctly specified 600V assembly could be appropriate.
However, the installer must also verify the current rating, DC switching category, SPD specification and inverter compatibility before selection.

4. When would a 1000V DC isolator be required?

A 1000V DC isolator assembly may be required when the maximum calculated voltage of the solar PV string exceeds the rating of a 600V assembly.
For example, a string of 15 solar panels, each with an open-circuit voltage of 42V, produces 630V under standard test conditions. Applying a 1.2 temperature correction factor increases the design voltage to 756V.
A 600V assembly would therefore be unsuitable, and an appropriately rated 1000V solution may be required.
Higher-voltage configurations can be relevant to longer strings, larger solar installations and certain commercial PV systems. The inverter’s maximum permitted DC input voltage must also be checked.

5. Is a 1000V DC isolator always better than a 600V isolator?

No. A higher voltage rating does not automatically make a DC isolator safer or more effective.
Both the DC isolator and integrated surge protection must be correctly matched to the electrical characteristics of the installation.
A suitably rated 600V assembly can be the correct solution for a lower-voltage system, while a 1000V assembly may be necessary where higher voltages are present.
The priority should always be selecting the correct protection rather than simply choosing the highest available rating.

6. What is the difference between Type 2 and Type 1+2 surge protection?

Type 2 surge protection is designed to protect against transient overvoltages, including those associated with induced lightning surges and switching events.
Combined Type 1+2 surge protection incorporates additional capability to handle lightning impulse currents where this is required by the installation’s lightning protection strategy.
The correct SPD type depends on the system design, lightning protection arrangements, risk assessment and applicable regulations.
Type 1+2 is not automatically required for every solar installation, and a correctly specified Type 2 SPD may be appropriate.